Features of the processing of HDPE

If you need a reliable plastic recycling partner, then you do not need to read this article. Just follow this link https://polymer.in.ua/ . All coordinates are at the top of the site, call immediately and let’s solve the tasks together.

Если Вам нужен надёжный партнёр по переработке пластика, то не нужно читать эту статью. Просто переходите по этой ссылке https://polymer.in.ua/ . Все координаты вверху сайта, сразу звоните и давайте вместе решать поставленные задачи.

Low pressure polymers or HDPE are produced due to the effects of low pressure. Such a polymer is quite durable and tough. It is used for the manufacture of pipes, containers, containers, films, fences. The low pressure polymer is very stable in the environment, it is not affected by moisture, salt, alkali, aggressive media. In order for it to decompose it will take about three centuries. This is a tremendous time.
It is desirable to process such a polymer in the first order, especially since the product obtained at the outlet is very well used a second time. The only disadvantage obtained during the processing of goods is the loss of quality. Of course, there are a number of technologies that allow in the production process to restore them. Secondary HDPE is used in the manufacture of covers, decor, panels for cars. Such a polymer will be cheaper than the primary one, because in fact the material is already ready, it only needs to be recycled and not to use complex technologies for its production.
In order for recycling to be successful, there are a number of steps that must go through waste. Initially, they need to be sorted, then cleaned from all sorts of pollution, especially organic. Inorganic trash is also removed. Next, the raw material is pressed and subjected to washing in an automated way, then drying. The material passes through the crusher, and after it enters the extruder, where the components are mixed, which allow to improve the quality.
Of this material often produce finishing materials, insulation, hoses, and more. To do this, the polymer is melted and poured into the required forms, then cooled and packaged. Products that can be obtained through processing are constantly expanding, and technologies are being improved.